Elektra DM20 twin in-screed underfloor heating cable from PAP Heating Solutions
ELEKTRA VCD and DM20 Floor Heating cables comply with the new electrical
wiring regulations which are now in force (AS/NZ3000/2007). ELEKTRA's Unique twin cable
design also eliminates the potential for electromagnetic radiation. Customers considering
floor heating may have many questions including what types of floor coverings are suitable
and whether tile heating is compatible with existing heating in the home. Please check
out our newly redesigned website where you'll find many of the answers! Hit the enquiries
button to ask for more information or to request a quote.
ELEKTRA DM20 "in floor heating cable" is a twin cable design with a single sided power
supply and is controlled by an electronic thermostat. It is installed on top of an existing
floor in a cement screed or self levelling compound of approximately 6-8mm thick and can be
installed under many different floor surfaces which radiate heat easily, such as tiles, slate,
stone, low pile carpet and some wooden floor panels.
The ELEKTRA DM20 is a "quick response" heating system and if the room has effective thermal
insulation it may be used as the primary heating system. Especially popular in bathrooms and
toilets where it provides warmth underfoot and keeps your towels and floors dry and free of
mould.
- Silent and invisible.
- No ducts or vents, no maintenance or cleaning.
- Efficient and cost effective.
- Individual room thermostat controls.
Thermostats
The range of Electronic Thermostats is especially developed for control of electric in-floor
heating. Their elegant design is for vertical flush mounting in a standard wall bracket or
DIN rail mounting in a switch board (16 amp & 2 pole switch). The thermostats include
either a floor or air sensor - the temperature is controlled with an accuracy of only 0.4
degree C.
The Range
MTC for standard room mount, MCC2 with built-in four event clock which is factory set or you
can adjust for your own on and off times. The ETN is for DIN rail mount in a switch board.
For further information contact:
P.A.P. Heating Solutions
phone: (02) 6242 9310
fax: (02) 6242 9398
web: www.papheatingsolutions.com.au
|
